Quote:
|
Originally Posted by fwank7
one last question.if the motor to the dish is not working can i move it by hand if thats possible? i know it sounds like a pain in the rear but just trying to cover all my basics before i attempt it..thank you very much for your quick reply's..
|
You should be able to move the dish by hand to the needed spot. I would take a compass and get a 'approximate' location of the direction you need to be pointed at I805, just to give you a starting point.
Remeber to set the LO setting for the lnb to 5150 in the Fortec for the
c band lnb.