[gozo]

hello guys, thanks for ur help when i needed u guided me in the right direction, now my dish is working, i'm able to see 97W and 123W so i believe i'm ok with the track on the arc,, now here is my question, i can get signal on 123Wwhen i'm close to the dish , i'm far abouts 50 foot from the dish and i have an inline signal amplifier, i can get about 50% quality on 97 when i'm home but on 123 i got no quality at all, when close ( i mean, 2 meters from the dish i got quality,) but when far at home i got no quality, i did not skew the lnb , here is another question the way i tried to find the signal was with a circular lnb , at the receiver on usals i put my longitude and latitud then i tried to find 82 wich is the closest to the south, i used circular cuz a friend told me is easy to find signal with a siganl meter , circular lnb and 82, so i did it the dish moved to 82 , i put my latitud to the motor and put the elevation to the dish and played with the right and left direction to find dome signal at about 82, easier i found 82 so i fine tuned elevation on 82 at the best point on quality, then i tried to find the most west circular polarity one wich i think is 119, not sure, so i moved my dish and it foud signal really good i mean about 85 to 90% wich is good, then i replaced the lnb circular for the linear lnb, and tried to find 123 and i got it and got about 60% no more, moved the dish up and down , nothing same all, right left, nothinf same all so tha's the best i can get, i did not skew the lnb, but reading about i found that may i have to turn the lnb, in wich way sure i try both? i'm at 79.6 longitude and 44.4 latitude, in canada, any help will be aprecciated, one more? at the east , will i able to get any sats at all? wich ones, i havent try yet. thanks in advance for ur help. =D>