Quote:
|
Originally Posted by mosborne
Thanks.
I'll put this info to use right away. BTW one more question.
WRT the elevation. Where I am measuring that from or on? Is it from the horizontal, or from the zero mark on the gauge printed on the dish attachement?
|
I would use the scale on the dish to set it's elevation.
These dish's receive the signal via an "offset" so a dish set to say 45 degrees will not look like 45 degrees from the side when you look at it.
This site gives a good visual example of what's going on:
http://www.dreambox.net.au/~klona/v3...ositioning.htm