|
I think it may not be the switch that is causing the problem.
It could be the receiver. I had BEC DB6600 CI which I used
with a 4*1 switch and it was identifying all the four dishes.
I returned it and got a Fortec Star 6000 and it is behaving strange.
1) When I connect DN 61.5, DN 110, DN 119 and Telstar5 97 to
port A, B, C and D respectively the receiver is able to get only DN satellites.
2) When I change the connection, Telstar5 97, DN 61.5, DN 110
and DN 119 connected to port A, B, C and D respectively I get
only Telstar5, rest all DN's signal strength goes down.
3)When I change the connection, DN 61.5, Telstar5 97, DN 110
and DN 119 connected to port A, B, C and D respectively I get
only all DN's back and now Telstar5 is gone, the signal strength goes down for Telstar5.
|