View Single Post
  #2 (permalink)  
Old 09-25-2004, 01:41 PM
wejones's Avatar
wejones wejones is offline
Cranky Crumudgeon
Expert
 
Join Date: Aug 2003
Location: MAINE
Posts: 2,755
Rep Power: 476
wejones is a splendid one to beholdwejones is a splendid one to beholdwejones is a splendid one to beholdwejones is a splendid one to beholdwejones is a splendid one to beholdwejones is a splendid one to beholdwejones is a splendid one to behold
Re: Low SR...1030a help me please !

Quote:
Originally Posted by cebrobertus
hello
I need an help for y twinhan 1030a (common interface on board).The transponders with SR 5632 6111 or each other under 18000 can't find it
by my card.I tried with different software (original vision dtv,progdvb,dvb dream.The technical caracteristics of my card i work from 2-45Mb.How can i do? please help me....

Thank you

Robs
If you have problems with those SRs, it probably isn't the card. I've done SRs as low as 1150 with my 1020a, which should be similar characteristics, and my lnbs are quite old.
With low SRs, however, your lnb becomes more important. If your lnb drifts a lot or is off frequency, then you might have problems. Or, if your overall signal is marginal strength.
However, I'd recommend trying to tune in using freqs that are a couple MHz above and/or below the published freqs for the transponder you are trying to tune, because if your lnb is off freq, you may just not be close enough for it to lock in.
Reply With Quote