|
Druze:...if you get 2 screws in a rafter and 2 in the plywood,you can use 1 1/2 inch wood screws(I recommend galvanized square head drive).If you do not hit rafters,you are still gonna need at least 1 inch screws.Going into facia requires a similar setup.My favorite install is a 5/16ths hex drive inch and a half wood screw w/built in washer...BANG!! driver home in one swift kick in da arse.just set the mounting foot in place,squeeze a squirt of goo in the hole and line up the screw in your battery drill and ..MMMPPHH!!!Bang 'er in!!Better than SEX!!!...I think...been a while!!HARHAHAHAR!!! 8)
__________________
you pilgrims with short muskets,please step to the front of the firing line.
|