Just got some stuff from Sadoun: 90 cm disk,
HH90 motor, Fortecstar Lifetime Ultra, and a TwinHan PCI card 1020A. I was successfully installed the disk, got lots of FTA chanel from many sattites between 93W-123W (I am at Longitud 111.9W, Latitude 33.3 N, and have a limited look angle since I install my disk on the fence wall). Everything works fine with the Fortec Star receiver.
I can not get the VisionDTV playing. It displays the 1st picture of the channel and stay there. Some time It hangs. Is there anyone have the same problem and know how to correct this? I don't know if this is the problem with the VisionPlus PCI card or the VisionDTV (V 2.42a). Event though I have a good signal Strength and signal quality show in the Fortec Star receiver, the VisionDTV show a lower signal strength and quality. Sometime it show 0% quality. When VisionDTV show some signal quality (15%), Scan the Satelite got many channel from T5. But when ever I play a channel, It display the 1st screen and freeze there.
Any suggestion to correct this problem is appreciated. (I tryed to connect to
www.visionplus.com.tw and
www.twinhan.com but can't reach them)