Depend on what kind of dish you use not all 30 inches dish LNB are the same, if you using Samsonic Dish - i am sure that they use LNB type = 10750
Quote:
|
Originally Posted by dtsexpert
You are confuse transponder # and Symbol Rate. Transponder# on a satellite is not related to the transponders # on your receiver.
Correct info for VTV4:
Freq: 12177, Polarity V, Symbol Rate 23000. You can ignore the Video/Audio Pids and PCR. Once you get lock on T5, the receicer will find the Pids/PCR. You might spend more time to read before messing arround with the settings.
Michael
Quote:
|
Originally Posted by bobzenmail
in "antenna setup">"TP">
using right arrow all my options are as follows:
11749V7.232
11766V5.171
SO ON...
UP TO...
12152H20.000
12177V23.000 < MAX THEN BACK TO TOP AGAIN.
ACCORDING TO THIS WEBSITE:
http://www.lyngsat.com/ia5.html
IT SHOULD BE: "12177 V tp 27"
SCROLL DOWN. IT ON LAST PAGE LEFT HAND SIDE.
SO I WENT INTO "MENUE">"INSTALLATION">"EDIT TP/SATELLITE">"T5/KU">"EDIT TP">"NEW">"DOWN FREQUENCY"=12177>"SYMBOL RATE"=27.000 MSP>"POLARITY"=VERTICAL.
WENT BACK INTO "ANTENNA SETUP">"T5/KU">"TP" ..... NOW I HAVE 12177V27.000 ALSO. 12177V223.000 IS STILL THERE.
AM I WRONG TO DO THAT? THEN SPECIFICATION ON
http://www.lyngsat.com/ia5.html
SAY IT SHOULD BE: 12177V27.000 |
|