Start by pointing your dish to the right Azimuth and Elevation. Use the correct tilt on the LNBF. To calculate all that see:
http://sadoun.com/Sat/Installation/S...Calculator.htm
Hook up the satellite signal meter between the LNBF and receiver.
You will see a light and hear a tone.
Start with the needle in the middle at 5 (use the knob to adjust the needle)
Move the dish slowly. Notice the Needle
If it goes higher, the signal is getting stronger.
If it reaches 10, use the knob to lower it to 5 again.
When the needle no longer goes up, that means you reached the peak.
Try adjusting the dish elevation up and down (slowly) and see if you get stronger signal.
