Quote:
|
Originally Posted by jackp
Hey BoBkat,I have both 1020 twinhan,nexus wintv video card.I am using one at a time. Ok here we go lof1 cband 5150(like satcom/c-3),lof 2 ku=10750 standard ku (like amc5/k5 or amc3/k3),lof 3=dbs 10600 universal lnb(echostar,nimiq1,2)lof 4/ maybe my sg2100 hh drive satellite.Is this correct? thank big guy |
Well, that's partially correct. LOF3 of 10,600 Universal would
not be for EchoStar or Nimiq - those satellites are DTH circular polarity with a L.O. frequency of 11,250 MHz. I have a feeling that your card(s) allow you to set up to 4 dishes connected with a DiSEqC 4-way switch -- this is likely what it means by LOF1, LOF2, etc. What you would do is set the L.O. frequencies for each dish -- so for example if you had dish 1 as DishNetwork 119, set LOF1=11,250 MHZ. If you had dish 2 and 3 as Nimiq 82 and Nimiq 91, set LOF2=11,250 MHZ and LOF3=11,250 MHZ. Then if you had the 4th dish for T5, set LOF4=10,750 MHZ (if you had a standard LNB; if you had a universal LNB set it to 10,600 MHz). All this is assuming your card(s) support the DiSEqC protocol. Its hard to guess without seeing your setup.
kat