Thread: HH Motors with Pole or U-Bolt mounting
View Single Post
  #2 (permalink)  
Old 08-31-2004, 01:13 PM
pmb1010's Avatar
pmb1010 pmb1010 is offline
Super Pro
Expert
  
Join Date: Feb 2004
Posts: 1,303
Rep Power: 313
pmb1010 is a splendid one to beholdpmb1010 is a splendid one to beholdpmb1010 is a splendid one to beholdpmb1010 is a splendid one to beholdpmb1010 is a splendid one to beholdpmb1010 is a splendid one to beholdpmb1010 is a splendid one to behold
Re: HH Motors with Pole or U-Bolt mounting
Quote:
Originally Posted by JonBlack
Hi,

I was looking to purchase a complete FTA system. I've noticed that they come with the HH motors. It seems you have an option of pole mounted or u-bolts. I was under the impression that you needed u-bolts to mount the HH motor.

Can I order the pole mounted version and still use the HH motor?

Is one mounting preferable over the other for the HH motor?

Thanks,
JB
It's the dish that's availaible in pole mount, or flat mount.
You could buy a "flat mount" dish, remove the flat mount, and install an HH90 motor on that part of the dish. You then mount the motor to a pole using it's U bolts.

If you bought a pole mount dish, you can just take the U brackets and mount the motor, too. Either way works with the motor.

The bottom line is with no motor, then you'll need to decide if you mount the (stand alone dish) to a flat area (similar to the way Direct TV dishes mount), or on a pole.
Reply With Quote