Quote:
|
Originally Posted by razinboy
One more update:
As I mentioned earlier, I was getting no Quality signal. However, when I switched the Tp Freq. from 11749 (default) to 11836 I got a quality signal that's 70-80%. Level is now at 93%. However, the scan picks up no channels. All other Tp frequencies are 0%. Is the problem still alignment or is it a receiver setting problem?
Thanks!
|
It almost sounds like you're on the wrong satellite. If you get some quality, then you scan FTA it looks for specific pre-programmed transponder frequencies and symbol rates for the particular satellite you have selected in the box's menus.
Seems to me, if you're on the wrong sat and scan, it won't find the right mix and you'll get no channels... I've never tried that so this is just a guess on my part.
Can you do a manual scan of the transponder 11836 alone, since you get signal indication maybe if you scan that it'll give you a channel.